Description
Aluminium 64430 Round Bar
Aluminium 64430 Round Bar / IS 64430 aluminium alloy, also widely known as HE30, is a high-strength, heat-treatable aluminium grade commonly used in structural and engineering applications. It is closely equivalent to AA 6351 and the modern European grade EN AW-6082, making it one of the most preferred alloys for industrial use.
We are leading suppliers and stockists of IS 64430 aluminium round bars, plates, flats, and extrusions in Mumbai, India, offering high-quality material with test certificates and fast delivery. We Stock and Supply Material from Jindal Aluminium, Hindalco, Balco etc.
IS 733 (1983) 64430 Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (for General Engineering Purposes)
IS 736 (1986) 64430 Aluminium Round Bars Wrought Aluminium and Aluminium Alloy Plate for General Engineering Purposes.
IS 737 (2008) 64430 Wrought Aluminium and Aluminium Alloy Sheet and Strip for General Engineering Purposes.
IS 1285 (2002) 64430 Aluminium Round Bars Wrought Aluminium and Aluminium Alloys Extruded Round Tube and Hollow Sections for General Engineering Purposes.
Aluminium IS 64430 Chemical composition :
| Elements | Min. | Max. |
| Cu | – | 0.10 |
| Mg | 0.40 | 1.20 |
| Si | 0.60 | 1.30 |
| Fe | – | 0.60 |
| Mn | 0.40 | 1.00 |
| Zn | – | 0.10 |
| Ti or Other | – | 0.20 |
| Cr | – | 0.25 |
| Al | Remainder | |
Applications of 64430 :
• Structural Components
• Marine Fittings
• Transport Equipment
• Machined Parts
• Extrusions and Round Bars
• Structural frameworks
• Marine and offshore components
• Automotive parts
• Aerospace fittings
• Industrial machinery
IS 64430 Aluminium Equivalent Grades :
IS 64430 is globally recognized under different standards:
• HE30 (British Standard)
• AA 6351 (American Standard)
• EN AW-6082 (European Standard)
• AlMgSi1 (DIN Standard)
• Old IS Standard H30 / HE30
Among these, 6082 aluminium is the most widely available modern equivalent.
Key Features of IS 64430 Aluminium :
• High strength and excellent load-bearing capacity
• Good corrosion resistance
• Excellent machinability
• Suitable for heat treatment (T6 condition)
• Good weldability and formability




